Field Controllers
      Back to home
      1. Help Center
      2. Building Automation
      3. Field Controllers

      What power is required for the Johnson Controls Touch Advanced Display (TAD)?

      Voltage Supply to the Panel mounted TADs require 18 to 32 VDC.

       

      The Panel mounted Touch Screen Displays power supplies are to be 18 to 32 VDC.

      Contact us for the recommended power supply.

      Do not connect supply power to the TAD before finishing wiring and checking all wiring
      connections. Short circuits or improperly connected wires can result in damage to the controller and void any warranty.

      Do not exceed the TAD electrical ratings. Exceeding controller electrical ratings can result in permanent damage to the controller and void any warranty.